czech version of t100 set up

[DF3OE]

The fourth button at the German T100 is a bell control switch and VERY rarely connected at all. I think I have seen only ONE machine with a connected bell control button ever.

[bandess]

hello Wolfgang and Henning,

I connected the machine to the t39 board as Henning suggested. No the machine has some "noise" but still not working as it is shown on the video.

here you can check the video (hard to hear due to office noise but after pressing the button the nosie stops)

https://drive.google.com/file/d/1W_OkPl ... sp=sharing

@Henning if the control unit is demaged what can we do with it?

thank you
Andras

[WolfgangH]

@Henning if the control unit is demaged what can we do with it?

find the problem and fix it.

I have not that much experience with teleprinters in general and your FSG in special, but I'm pretty confident that we manage it together with the help of some experienced forum members like Henning. I'm repairing at the moment also an T100s (Austrian version), so we can compare.

For the first step, please check if you have a schematic of your FSG. If not, please take a vew good pictures, so that we can see, what's inside your FSG.

Do you have a multimeter and are you familiar with it?

[Andreasankl]

Ich hatte bislang 2 Brno Maschinen zu Reparatur.
Bei den FSG sind die Hauptprobleme oxidierte Sicherungen.
Und der Papierkontakt schaltet nicht. Er wird über eine Stange gesteuert
und muss nach dem Papierwechsel entriegelt werden sonst läuft die
Maschine nicht.
Anbei einmal die Originalbeschreibung des FSG
und ein Bild vom Papierkontakt der befindet sich auf der Grundplatte
zwischen Drucker und Motor.

[WolfgangH]

To je zajímavé. Děkuji mnohokrát.