ADO steckerbelegung siemens T1000 Thema ist als GELÖST markiert

[Ruud]

Hello Rainer,

Thank you for your reply and information on the matter.

The T1000 has been used for radio teletype receiving in ham radio before.
The listings of the wire colors and their positions on de ado8 connector is all clear to me on the T1000 side.
I do have access to the former minesweeper where the T1000 is, I am not having enough time at the moment but in the next weeks i will so then I will report back to the forum with pictures of the interface board.

I have not enough knowledge of the T1000 to see if there are extra switches being installed or if mods are being done...

Greeetzzzzzz
Ruud PD0RH

[JaviRTTY]

Hello
about if the teletype is dual current 60 and -60 volts or works with AFSK,.
Here I send you a photo of a Spanish T1000, could you tell me what type it is, if it is dual current. Thank you.

[JaviRTTY]

Hello
about if the teletype is dual current 60 and -60 volts or works with AFSK,.
Here I send you a photo of a Spanish T1000, could you tell me what type it is, if it is dual current. Thank you.
https://telexforum.de/download/file.php ... &mode=view

[JaviRTTY]

Hello
about if the teletype is dual current 60 and -60 volts or works with AFSK,.
Here I send you a photo of a Spanish T1000, could you tell me what type it is, if it is dual current. Thank you.
https://telexforum.de/download/file.php ... &mode=view

[DF3OE]

compare your machine with this:

https://telexforum.de/viewtopic.php?t=3366

That's a double current machine +/- 60V Which yours is also most likely.

[JaviRTTY]

Thanks for the reply.
Sorry for duplicating the message, I don't know very well how this posting photos is going.
I understand that the connector assignment is like this
1-4 line
2-3 bridge
5-6 bridge.
I have to enter for a 1 a voltage of 60 volts and 20 mA and for a zero a voltage of -60 volts and 20 mA, is this so?

[M1ECY]

Hi Javi,

Please, we need to see the LAT card in your machine - this card sits vertically just behind the printer near the power supply - we all think you have a double current machine - if this is the case, once we see the card, then we will be able to help you.

[JaviRTTY]

Hi, let's see if it's this card, I don't know which is LAT

[JaviRTTY]

This is the big one

[JaviRTTY]

Hello, again, I think I was wrong, that must be the STT, I know what the LAT is, I'll see if I can locate it tomorrow and take a photo, thanks.