Philips PACT 200, where do I start

For service and support with i-Telex, its components and teleprinters in general

Moderator: M1ECY

Antworten

Topic author
hadoque
Rank 1
Rank 1
Beiträge: 6
Registriert: Do 29. Aug 2019, 22:55
Hauptanschluß:

Philips PACT 200, where do I start

#1

Beitrag von hadoque »

Hi
I've just laid hands on a Swedish Philips PACT 200, and I have no clue what to do with it. I have a dutch manual, for a PACT 220, downloaded from this forum, but it doesn't help me much. I would like to do some kind of self test.
The machine starts up, but the only response I get from it is paper feed and alarm when I lift the paper feeder lid.

I've measured internal voltages, seen by the fuses in the picture, and they are ok within a volt or so.

My goal is to use this as a serial terminal, connected to a computer. Also connecting to someone over the internet would be fun.

Where do I start? I am a hardware developer , so I have access to a lot of electronics equipment.
Benutzeravatar

DF3OE
Founder
Founder
Beiträge: 2885
Registriert: Di 7. Jun 2016, 09:45
Wohnort: Edemissen- Blumenhagen
Hauptanschluß: 925302 treu d
Kontaktdaten:

Re: Philips PACT 200, where do I start

#2

Beitrag von DF3OE »

Hi,
the PACT 200/220 is an extremely rare machine, Maybe you have the only one remaining. ;)
Yet, no documentation is available except what is here on the forum.
Only a few Italian military versions came up on the surplus market.

First of all you have to investigate which line connection system is installed. I assume it is from
Swedish Telex network. Hence it should be either TW39 line current or V.21 tone system.
Both generally need connection to the "central office" that the machine can work.
mfg
henning +++

925302 treu d - T1000Z (Hauptanschluss)
55571 fvler a - T100S
210911za hmb d - T150 (Werkstatt)
218308 test d - T1000S/LS (Werkstatt) Ausser Betrieb
925333 =treu d (Minitelex Sanyo SF100) defekt
Fax G2/G3: 05176-9754481 (Sanyo SF100 Thermofax) defekt

Topic author
hadoque
Rank 1
Rank 1
Beiträge: 6
Registriert: Do 29. Aug 2019, 22:55
Hauptanschluß:

Re: Philips PACT 200, where do I start

#3

Beitrag von hadoque »

Thanks for the quick answer. So, there is no way to get a printout of any kind without a communications connection? Yes, it seems to have been connected to the Swedish telex network, it has the Swedish "Televerket" logo on it.

Actually, there seems to be at least two more Swedish machines:
https://hagforstorget.se/inventarier_oc ... _220_telex

https://digitaltmuseum.se/021026361728/telexapparat

I will look into the Swedish telex network standard, if I can find it, to figure out how to connect it...
Du hast keine ausreichende Berechtigung, um die Dateianhänge dieses Beitrags anzusehen.
Benutzeravatar

DF3OE
Founder
Founder
Beiträge: 2885
Registriert: Di 7. Jun 2016, 09:45
Wohnort: Edemissen- Blumenhagen
Hauptanschluß: 925302 treu d
Kontaktdaten:

Re: Philips PACT 200, where do I start

#4

Beitrag von DF3OE »

If the grey cable on the left hand side going upwards is for the outgoing connection, it looks
very much like a tone frequency board, assumingly V.21 standard.
mfg
henning +++

925302 treu d - T1000Z (Hauptanschluss)
55571 fvler a - T100S
210911za hmb d - T150 (Werkstatt)
218308 test d - T1000S/LS (Werkstatt) Ausser Betrieb
925333 =treu d (Minitelex Sanyo SF100) defekt
Fax G2/G3: 05176-9754481 (Sanyo SF100 Thermofax) defekt

Topic author
hadoque
Rank 1
Rank 1
Beiträge: 6
Registriert: Do 29. Aug 2019, 22:55
Hauptanschluß:

Re: Philips PACT 200, where do I start

#5

Beitrag von hadoque »

So, can I connect it to the signal lines of a v.21 modem?
Benutzeravatar

DF3OE
Founder
Founder
Beiträge: 2885
Registriert: Di 7. Jun 2016, 09:45
Wohnort: Edemissen- Blumenhagen
Hauptanschluß: 925302 treu d
Kontaktdaten:

Re: Philips PACT 200, where do I start

#6

Beitrag von DF3OE »

Genrally yes. The machine should work in answer mode. What type of plug connector is installed at the machine?
If it is a ADo8 standard, connection to the line is 1 and 4 of the plug.

Telex works 5-bit, 50 baud.
mfg
henning +++

925302 treu d - T1000Z (Hauptanschluss)
55571 fvler a - T100S
210911za hmb d - T150 (Werkstatt)
218308 test d - T1000S/LS (Werkstatt) Ausser Betrieb
925333 =treu d (Minitelex Sanyo SF100) defekt
Fax G2/G3: 05176-9754481 (Sanyo SF100 Thermofax) defekt

Topic author
hadoque
Rank 1
Rank 1
Beiträge: 6
Registriert: Do 29. Aug 2019, 22:55
Hauptanschluß:

Re: Philips PACT 200, where do I start

#7

Beitrag von hadoque »

Great, it's a ADo8 connector. I will try to get hold of an old modem to experiment with.
Benutzeravatar

DF3OE
Founder
Founder
Beiträge: 2885
Registriert: Di 7. Jun 2016, 09:45
Wohnort: Edemissen- Blumenhagen
Hauptanschluß: 925302 treu d
Kontaktdaten:

Re: Philips PACT 200, where do I start

#8

Beitrag von DF3OE »

But I tell you, almost ALL old V.21 do not work below 300 baud anymore, from own experience.. ;)
But give it a try.
mfg
henning +++

925302 treu d - T1000Z (Hauptanschluss)
55571 fvler a - T100S
210911za hmb d - T150 (Werkstatt)
218308 test d - T1000S/LS (Werkstatt) Ausser Betrieb
925333 =treu d (Minitelex Sanyo SF100) defekt
Fax G2/G3: 05176-9754481 (Sanyo SF100 Thermofax) defekt

Topic author
hadoque
Rank 1
Rank 1
Beiträge: 6
Registriert: Do 29. Aug 2019, 22:55
Hauptanschluß:

Re: Philips PACT 200, where do I start

#9

Beitrag von hadoque »

Thanks for the tips. If I get anywhere, I’ll document it, since the machine is so rare...

Topic author
hadoque
Rank 1
Rank 1
Beiträge: 6
Registriert: Do 29. Aug 2019, 22:55
Hauptanschluß:

Re: Philips PACT 200, where do I start

#10

Beitrag von hadoque »

How would you go about testing the functionality of a machine like this one?
Antworten

Zurück zu „Service and Support“