RFT F2000 out of the box problems

Antworten

Topic author
tom
Rank 1
Rank 1
Beiträge: 5
Registriert: Mi 4. Nov 2020, 19:43
Hauptanschluß:

RFT F2000 out of the box problems

#1

Beitrag: # 21986Beitrag tom »

Hello Friends,
Hope I write to the appropriate section.
An F2000 machine I try to use first time.
The machine is functional, can work in local mode.
I face to several problems here.
Could you give me some hints to start with?

1. version
Can you help me in identifying the version of the panel? The machine was produced around 1986. (The military hand book was translated and printed in that year). Versions of AS 01, 02, 03, 04, 05 is mentioned here.

2. communication connector
The machine has 8 pins as to its connector without any numbering. Is there an available drawing of PIN identification you may share?

3. Now the up-left corner yellow LED is blinking as the machine is not connected to any other active device. A design of an electronic circuit good for "imitate" an active communication line would be a great help. I may try if transmitting function works.

4. My plan is to connect the machine to a military transceiver through mic/phone connections. Any of my friends here may have an experience with that way of transmitting?

5. mini batteries
The machine needs two batteries seems run out of stock in my country (or worldwide?). Do you have an idea of any shop?

6. passwort protection of transmission mode lock
I cannot decide if the machine is protected by a password or not.
Is there a predefined passwort for each machine or it can be set (and changed) individually by operator? The handbook is not detailed about this topic. It says if the operator wants to activate the protection it can be done in programming mode. Does it mean that I can set a new password or I can use one predefined password only?
Was the machine in protected mode when the factory released it?
Does the password protection work without batteries (has it got a battery-dependent memory if this kind) after I turn off the machine? Or it forgets password without batteries?

That is how I did so far:
I tried to use programming mode 04 according to handbook. Machine printed: "04" and "SEND ON/OFF".
I keyed a password combination of "1234T" as my password then pushed a "space".
I set the password lock into inactive mode with sending "ON".
After pushing ? button it did not print "ON" but "*?" symbols.

Any help is appreciated! Thank you, Tamas HA5NKG , Ungarn
Benutzeravatar

Franz
Rank 12
Rank 12
Beiträge: 3103
Registriert: Do 18. Mai 2017, 15:15
Wohnort: Dreieich
Hauptanschluß: 411898 bfsz d

Re: RFT F2000 out of the box problems

#2

Beitrag: # 21988Beitrag Franz »

Hi Tom, welcome to the forum ..

unfortunately I' am not owner of a F2000, but can help you with the ident of the numbering of the communication plug.

Here is a photo the 8-pin SOCKET, so the numbering of the 8-pin PLUG is the other way round....

I think, other members of the forum can help you to answer the further questions ....

73 Franz
Du hast keine ausreichende Berechtigung, um die Dateianhänge dieses Beitrags anzusehen.
Folgende Benutzer bedankten sich beim Autor Franz für den Beitrag:
tom
411898 bfsz d + T100 (Schmaltastatur :thumbsup: )
411744 eddd d + T100 (Schmaltastatur :thumbsup: )
886747z bmwi d + T100Z (Schmaltastatur :thumbsup: ) )
4189939 eddz d + T100S (Volltastatur :/ )
Alle erreichbar von 06.00 - 22.00 Uhr lokal
Benutzeravatar

Franz
Rank 12
Rank 12
Beiträge: 3103
Registriert: Do 18. Mai 2017, 15:15
Wohnort: Dreieich
Hauptanschluß: 411898 bfsz d

Re: RFT F2000 out of the box problems

#3

Beitrag: # 21989Beitrag Franz »

In additon to the picture:
Here is the numbering of the plug in reference to the socket ....
Du hast keine ausreichende Berechtigung, um die Dateianhänge dieses Beitrags anzusehen.
Folgende Benutzer bedankten sich beim Autor Franz für den Beitrag:
tom
411898 bfsz d + T100 (Schmaltastatur :thumbsup: )
411744 eddd d + T100 (Schmaltastatur :thumbsup: )
886747z bmwi d + T100Z (Schmaltastatur :thumbsup: ) )
4189939 eddz d + T100S (Volltastatur :/ )
Alle erreichbar von 06.00 - 22.00 Uhr lokal

Topic author
tom
Rank 1
Rank 1
Beiträge: 5
Registriert: Mi 4. Nov 2020, 19:43
Hauptanschluß:

Re: RFT F2000 out of the box problems

#4

Beitrag: # 22568Beitrag tom »

Hello Franz,
thank you for your help.
I am fine with the socket numbering thanks to your comments.
I checked out the transmitter circle of socket 1-2, it is around 64 Volts. The machine probably functions.

Also found the version number inside the panels: it is AS 02.
Benutzeravatar

dh0jsv
Rank 4
Rank 4
Beiträge: 299
Registriert: Di 3. Sep 2019, 14:28
Wohnort: Zwickau
Hauptanschluß: 785069 frhuf dd

Re: RFT F2000 out of the box problems

#5

Beitrag: # 22579Beitrag dh0jsv »

Hi Tamas,

the batteries are LR44, the same is a 313 or MR44, V13GA....

Sven
Sven, DH0JSV
-------------------------------------------
785069 frhuf dd (T51)
784223 nema dd (F2000)
6292941 sik d (T1000)

Anschlüsse 24/7 erreichbar

----------------------
Prüfkoffer DE2000

Topic author
tom
Rank 1
Rank 1
Beiträge: 5
Registriert: Mi 4. Nov 2020, 19:43
Hauptanschluß:

Re: RFT F2000 out of the box problems

#6

Beitrag: # 24063Beitrag tom »

Hello Sven,
thank you for your help!
Tamas, HA5NKG

zis
Rank 1
Rank 1
Beiträge: 9
Registriert: Fr 6. Jan 2023, 17:15
Hauptanschluß:

Re: RFT F2000 out of the box problems

#7

Beitrag: # 35527Beitrag zis »

Link to the site where you can buy spare parts for teletype RFT F2000 and F2500
http://zis.tomsk.ru/
Benutzeravatar

SAS
Rank 7
Rank 7
Beiträge: 658
Registriert: Mi 13. Jun 2018, 16:12
Wohnort: Berlin
Hauptanschluß: 30944750
Kontaktdaten:

Re: RFT F2000 out of the box problems

#8

Beitrag: # 35550Beitrag SAS »

Steckerbelegung der AS01, anbei
Pages from F-2000 AS01 InstAnw.pdf
Antworten

Zurück zu „F2000“