Restoring another T1000

Tool Time!
Antworten

Topic author
Pb1x
Rank 1
Rank 1
Beiträge: 5
Registriert: Do 28. Jan 2021, 21:03
Wohnort: Leiden, NL
Hauptanschluß:
Kontaktdaten:

Restoring another T1000

#1

Beitrag: # 23525Beitrag Pb1x »

I recently bought a T1000 being sold as "broken" on the local auction site.

It was marked as "Regie T& T"

After inspecting it it seems to not have any big problems in the mechanics or core electronics: local mode works,
as does the tape punch and reader.

There was a lot of white crystalline fluff on all black hard plastic parts. It seemed to dissolve in water, so this was
not a big problem, I hope it's not toxic or anything :scratch:

The main electronics board (GE) seems to be a variant of the GE2 board I saw in the service schematics, however, the
big capacitors seem to be elkos not tantalums.

Here's a photo of the GE board.

Bild

(I did replace some of the old elko's with new ones as the telex would seem to "reset" as soon as it tried to print a character,
I measured 2vpp spikes on the 12V line when that happened)

However, I have not had any luck getting the line interface working. It seems to be a variant that only uses one pair,
besides this I don't know much yet.

Topic author
Pb1x
Rank 1
Rank 1
Beiträge: 5
Registriert: Do 28. Jan 2021, 21:03
Wohnort: Leiden, NL
Hauptanschluß:
Kontaktdaten:

Re: Restoring another T1000

#2

Beitrag: # 23527Beitrag Pb1x »

Here's an image of the line modules (STT, etc):
Bild

and one of the weird crystals:
Bild

If anyone knows what kind of line this interfaced to, and what the weird crystals/powder might be, please let me know.

(The crystals are not battery/capacitor acid as they appear only on black plastic and all the PCBs seem fine.)
Benutzeravatar

M1ECY
Rank 7
Rank 7
Beiträge: 682
Registriert: Fr 11. Aug 2017, 13:13
Wohnort: Hitchin Hertfordshire, UK
Hauptanschluß: 669089

Re: Restoring another T1000

#3

Beitrag: # 23533Beitrag M1ECY »

Hi, it looks to be in quite good condition from the pictures you have uploaded - please, upload many more - Good quality as found pictures are always helpful for machines that have had less careful repairs in the past :)

Cheers
Sean
669089 Siemen G - T100S Online 24H
299709 Antosh G - Creed 444 - Double Current R + D (0800 - 2100) and a bit tempremental
459724 NC
Benutzeravatar

wjack
Rank 1
Rank 1
Beiträge: 53
Registriert: So 7. Feb 2021, 09:12
Wohnort: Bad Tölz
Hauptanschluß: 521818 wjack d

Re: Restoring another T1000

#4

Beitrag: # 23670Beitrag wjack »

Hello Theodore,

I try to give you the answer to the STT/LAT, look like the same PCB that I have in my T1000Z.
It is the interface for a connect to the "Linenstrom" of a current loop source driven rtty-demodulator e.g. the NZ47 (R&S) or FSE401(Siemens).
Some radio-amateure rtty decoder have this current loop source, too. :headset:
The LAT can driven 2-wire, single-current or 4-wire, with 60V - 40mA.
Connector on your T1000 for this is the same ADo8 (8 pin) that the FS use in the FS-PBX, but the pinout need a minor modification for the current-loop of the LAT.

Take a look on the WEB-Side of DF3OE - he is also in this forum..
http://www.teleprinter.net/txp/english/technik.shtml

I hope this litte info is helpful to start in the deep of current-loop.

vy73
Werner
dd7xp
521818 wjack d - T1000 (24/7)
Benutzeravatar

wjack
Rank 1
Rank 1
Beiträge: 53
Registriert: So 7. Feb 2021, 09:12
Wohnort: Bad Tölz
Hauptanschluß: 521818 wjack d

Re: Restoring another T1000

#5

Beitrag: # 23673Beitrag wjack »

Another nice page from TUM - Linienstrom..
https://www.ei.tum.de/lkn/museum/fernsc ... bindungen/
521818 wjack d - T1000 (24/7)
Benutzeravatar

DF3OE
Founder
Founder
Beiträge: 3056
Registriert: Di 7. Jun 2016, 09:45
Wohnort: Edemissen - Blumenhagen
Hauptanschluß: 925302 treu d
Kontaktdaten:

Re: Restoring another T1000

#6

Beitrag: # 23675Beitrag DF3OE »

wjack hat geschrieben: So 14. Feb 2021, 11:21 Another nice page from TUM - Linienstrom..
https://www.ei.tum.de/lkn/museum/fernsc ... bindungen/
Aber auch dort ist man nicht in der Lage das Papier korrekt zu führen...
Das Papier gehört VOR das Abreißlineal. VOR VOR VOR :rofl: :cry:

Sorry, musste ich mal loswerden.... :)
Folgende Benutzer bedankten sich beim Autor DF3OE für den Beitrag (Insgesamt 2):
ReinholdKochdeBart
mfg
henning +++

925302 treu d - T1000Z (Hauptanschluss)
55571 fvler a - T100S
210911za hmb d - T150 (Werkstatt)
218308 test d - T1000S/LS (Werkstatt)
925333 =treu d (Minitelex Sanyo SF100) defekt
Fax G2/G3: 05176-9754481 (Sanyo SF100 Thermofax) defekt
Benutzeravatar

wjack
Rank 1
Rank 1
Beiträge: 53
Registriert: So 7. Feb 2021, 09:12
Wohnort: Bad Tölz
Hauptanschluß: 521818 wjack d

Re: Restoring another T1000

#7

Beitrag: # 23704Beitrag wjack »

:wat: what an inappropriate comment
Unfortunately, there is no connection to the subject discussed here.

:wat: Was für eine Anmerkung..
Der Zusammenhang zu dem hier behandelten Thema fehlt mir da leider..

Weitere Einlassungen können gerne in einem eigenen Topic "Betrieb eines Fernschreiber ohne Gehäuse und seine Unwegsamkeiten" diskutiert werden.

Your "Sorry.." can be accepted..
NNNN
521818 wjack d - T1000 (24/7)
Benutzeravatar

wjack
Rank 1
Rank 1
Beiträge: 53
Registriert: So 7. Feb 2021, 09:12
Wohnort: Bad Tölz
Hauptanschluß: 521818 wjack d

Re: Restoring another T1000

#8

Beitrag: # 24098Beitrag wjack »

Hey Pb1x
Whats new with your current-loop connecting on the LAT?
Does you need further step?
vy73
Werner
dd7xp
521818 wjack d - T1000 (24/7)
Antworten

Zurück zu „Machine Restoration“