Telexforum.de

Hey telexlovers
Bought an old siemens t100 on ebay kleinanzeigen.de, it is missing a cable at the back, see picture. Any info pinout etc ?.Any one that have a cable with connector that i can buy ?.
Thanks
Gruss
Fredrik - Denmark
PS you can reply i german I understand.

Are there T1000 with this connector? I only know these at the t68.
Same Pinout?

The connector itself can still bought. Just search for "DIN 41622". The housing or cable can only find used at ebay.
We have a rebuilt 3D print housing. But the ground of the machine is a problem.

The T100 version with this connector is VERY rare. I have never seen one in real life.
Just know them to be used in Australia and Swiss Army.
But as Siemens is quite standardized it should be same as T68 or T.send 61 tape transmitter.
I would have original connectors for sale.

For your information, adding picture.
Fredrik

Fredrik hat geschrieben: ↑Mi 17. Mär 2021, 15:43 For your information, adding picture.
Fredrik
PICT1373.JPG

Hello Frederik,
but there is a power cable with a plug. If i see it right, the cable leads through the socket into the device.

Hey JanL
Yes I know, I need to do some "reverse engineering", as the t68d connector also has power in it.

Is that connector only for the signal connection or extra options (paper end/alarm)?

eBay
eBay