Bringing up a T1000S

Tool Time!

Topic author
levend
Rank 1
Rank 1
Beiträge: 54
Registriert: Mo 10. Mai 2021, 23:25
Wohnort: Budapest, HU
Hauptanschluß: 1604188

Bringing up a T1000S

#1

Beitrag: # 25313Beitrag levend »

Dear forum members!
I recently acquired a Siemens T1000S machine, in okay conditions. I started the bring-up process, and had some limited success:
- By connecting pin 5-6 on the ADO-8 connector the machine is now stopped blinking the online led
- I was able to print diagnostic information using code 39. Monitor also working

However, when I try to switch the machine to online mode, the fan and the light came alive then after 3 seconds, it goes back to idle mode. Please see the video for visual clue:

My question:
- Is there any documentation in any language(but preferably in English) that explains the diagnostic results for code 39
- Do you have any clue about the "unable to local mode" issue I wrote in above
- Do you have any documentation or schematics for the machine in the forum? I tried the search functionality, but with google translate, it seems like I was out of luck.
Folgende Benutzer bedankten sich beim Autor levend für den Beitrag:
JanL
Best regards,
Balazs
Budapest, HU
Siemens T1000S - 1604188 elek h
ZB T100 - 73468 nycip h

Topic author
levend
Rank 1
Rank 1
Beiträge: 54
Registriert: Mo 10. Mai 2021, 23:25
Wohnort: Budapest, HU
Hauptanschluß: 1604188

Re: Bringing up a T1000S

#2

Beitrag: # 25314Beitrag levend »

This is the code 39 diagnostic print I had from the machine:
IMG_1591.jpeg
Du hast keine ausreichende Berechtigung, um die Dateianhänge dieses Beitrags anzusehen.
Best regards,
Balazs
Budapest, HU
Siemens T1000S - 1604188 elek h
ZB T100 - 73468 nycip h
Benutzeravatar

FelixF
Rank 4
Rank 4
Beiträge: 353
Registriert: Di 30. Jun 2020, 23:04
Wohnort: Westerwiehe
Hauptanschluß: 933501 growi d

Re: Bringing up a T1000S

#3

Beitrag: # 25318Beitrag FelixF »

Hello levend,
Welcome to the Forum.
You have to initialize your T1000S, but you need for that a Service plug. Without it, the behavior is normal.
The diagnostig print loocks OK. Here are manuals for it, but you are as new member not verified, but when you need some to work on it, the chances are good that you can get some. After some time you can get verified.
LG Felix
----------------------------------------
1. 933501 growi d-T100S online
2. 78110 - 7811x karlsr d - T34k online
3. 933799 frenz d -AB / Siemens Locher 15 online
4. 933596 kuehl d - T1000S online
5. 933502 mintlx d - Canon Fax-120 offline
6. BTX: 0524452250 -Siemens Bitel T3210 C

Topic author
levend
Rank 1
Rank 1
Beiträge: 54
Registriert: Mo 10. Mai 2021, 23:25
Wohnort: Budapest, HU
Hauptanschluß: 1604188

Re: Bringing up a T1000S

#4

Beitrag: # 25319Beitrag levend »

Hello FelixF!

Thank you for getting back to me - really appreciated!
I'm very relieved that the diagnostic print looks OK.
I read about this service plug here: https://telexforum.de/viewtopic.php?p=19652#p19652 is this the same?
Should it be connected here?
IMG_1604.jpeg
What pins should be connected on it to put it in service mode?
Many thanks for the help!!
Du hast keine ausreichende Berechtigung, um die Dateianhänge dieses Beitrags anzusehen.
Best regards,
Balazs
Budapest, HU
Siemens T1000S - 1604188 elek h
ZB T100 - 73468 nycip h
Benutzeravatar

DF3OE
Founder
Founder
Beiträge: 3056
Registriert: Di 7. Jun 2016, 09:45
Wohnort: Edemissen - Blumenhagen
Hauptanschluß: 925302 treu d
Kontaktdaten:

Re: Bringing up a T1000S

#5

Beitrag: # 25324Beitrag DF3OE »

Yes, the service plug is same for all T1000S and T1200 series machines.

You need it for any programming in "engineering mode".
mfg
henning +++

925302 treu d - T1000Z (Hauptanschluss)
55571 fvler a - T100S
210911za hmb d - T150 (Werkstatt)
218308 test d - T1000S/LS (Werkstatt)
925333 =treu d (Minitelex Sanyo SF100) defekt
Fax G2/G3: 05176-9754481 (Sanyo SF100 Thermofax) defekt

Topic author
levend
Rank 1
Rank 1
Beiträge: 54
Registriert: Mo 10. Mai 2021, 23:25
Wohnort: Budapest, HU
Hauptanschluß: 1604188

Re: Bringing up a T1000S

#6

Beitrag: # 25326Beitrag levend »

Hi DF3EO!

Thanks for the info! I managed to set-up the device in the following way:
- Connect pin 1 and pin 20 on the service connector with a wire
- Enter code 99

After this the device is operating smoothly in local mode.
- Writing and reading the disk
- Writing to device memory
- Printing

The next step will be connecting it to a pi-Telex based interface
Best regards,
Balazs
Budapest, HU
Siemens T1000S - 1604188 elek h
ZB T100 - 73468 nycip h
Benutzeravatar

FelixF
Rank 4
Rank 4
Beiträge: 353
Registriert: Di 30. Jun 2020, 23:04
Wohnort: Westerwiehe
Hauptanschluß: 933501 growi d

Re: Bringing up a T1000S

#7

Beitrag: # 25327Beitrag FelixF »

Have you checked the batteries?
LG Felix
----------------------------------------
1. 933501 growi d-T100S online
2. 78110 - 7811x karlsr d - T34k online
3. 933799 frenz d -AB / Siemens Locher 15 online
4. 933596 kuehl d - T1000S online
5. 933502 mintlx d - Canon Fax-120 offline
6. BTX: 0524452250 -Siemens Bitel T3210 C

Topic author
levend
Rank 1
Rank 1
Beiträge: 54
Registriert: Mo 10. Mai 2021, 23:25
Wohnort: Budapest, HU
Hauptanschluß: 1604188

Re: Bringing up a T1000S

#8

Beitrag: # 25328Beitrag levend »

Hi FelixF!

Yes, this particular machine was already edited by somebody in the past, and he replaced the batteries with an external one. See the image:
IMG_1600.jpeg
Du hast keine ausreichende Berechtigung, um die Dateianhänge dieses Beitrags anzusehen.
Best regards,
Balazs
Budapest, HU
Siemens T1000S - 1604188 elek h
ZB T100 - 73468 nycip h

Topic author
levend
Rank 1
Rank 1
Beiträge: 54
Registriert: Mo 10. Mai 2021, 23:25
Wohnort: Budapest, HU
Hauptanschluß: 1604188

Re: Bringing up a T1000S

#9

Beitrag: # 25333Beitrag levend »

I also have 2 more question:

- How can you set the date?
- How can you set the machine ID?
Best regards,
Balazs
Budapest, HU
Siemens T1000S - 1604188 elek h
ZB T100 - 73468 nycip h
Benutzeravatar

FelixF
Rank 4
Rank 4
Beiträge: 353
Registriert: Di 30. Jun 2020, 23:04
Wohnort: Westerwiehe
Hauptanschluß: 933501 growi d

Re: Bringing up a T1000S

#10

Beitrag: # 25334Beitrag FelixF »

Oh, interesting. My has a new Lithium and NI-MH akku.
LG Felix
----------------------------------------
1. 933501 growi d-T100S online
2. 78110 - 7811x karlsr d - T34k online
3. 933799 frenz d -AB / Siemens Locher 15 online
4. 933596 kuehl d - T1000S online
5. 933502 mintlx d - Canon Fax-120 offline
6. BTX: 0524452250 -Siemens Bitel T3210 C
Antworten

Zurück zu „Machine Restoration“