F2000A restoration

Tool Time!
Antworten

Topic author
levend
Rank 1
Rank 1
Beiträge: 54
Registriert: Mo 10. Mai 2021, 23:25
Wohnort: Budapest, HU
Hauptanschluß: 1604188

F2000A restoration

#1

Beitrag: # 34134Beitrag levend »

Hello forum members!

Yesterday I acquired a new machine: RFT F2000A. Originally it was in service at the Hungarian Railways but was already decommissioned when I found it. Photos of the device are below.
Conditions:
  • 2 keys are missing, and 2 more have weak springs, not pushing them back to normal position. Is it possible to fix the weak keys?
  • Somewhat loud high-frequency noise coming from the back of the device - similar to the one you hear near switching power supplies. Needs further investigation - opening the individual modules
  • Plastic cover for the punch tape unit is broken, and the punch tape holder wheel is bent
  • The most interesting one: the device is configured to communicate in the Hungarian language! When I powered it up it printed in Hungarian the following text: Data loss. Change batteries
I found the battery compartment and will change them today. Somewhere I read that the machine identifier was stored in the EPROM, so hopefully, that is still intact. But besides this, I still want to clean the device properly. For that, I hope you have some kind of tips or manuals. Any feedback is welcome.

5D339E41-6258-4292-AA96-8F3453467AB5.jpeg
30E88C71-4AC0-475F-8319-4E1E84F30D92.jpeg
363457FE-5B88-4AC1-88C5-FCC9B9F650C4.jpeg
269D70E7-90A4-45EC-A3C0-A83C30E71D61.jpeg
751D62AD-A9A3-4946-A718-4226E2DE6DD5.jpeg
7AF94FEE-2770-4CA2-B33D-9FBD88117B81.jpeg
Some serious time was put into this device
IMG_3486.JPG
The inspector observes the new asset
Du hast keine ausreichende Berechtigung, um die Dateianhänge dieses Beitrags anzusehen.
Folgende Benutzer bedankten sich beim Autor levend für den Beitrag:
roliw
Best regards,
Balazs
Budapest, HU
Siemens T1000S - 1604188 elek h
ZB T100 - 73468 nycip h
Benutzeravatar

roliw
Rank 3
Rank 3
Beiträge: 192
Registriert: Mo 15. Apr 2019, 22:02
Wohnort: CH-6243 Egolzwil, Luzern
Hauptanschluß: 155200

Re: F2000A restoration

#2

Beitrag: # 34149Beitrag roliw »

A good inspector is always very important! :thumbup:
Viele Grüsse
K. Roland Wuethrich
CH-6243 Egolzwil
iTelex:
155200 FS200Z Hauptanschluss 24x7
188200 FS200
199200 t68d
Benutzeravatar

SAS
Rank 7
Rank 7
Beiträge: 655
Registriert: Mi 13. Jun 2018, 16:12
Wohnort: Berlin
Hauptanschluß: 30944750
Kontaktdaten:

Re: F2000A restoration

#3

Beitrag: # 34150Beitrag SAS »

Tastatur TA_08
F2000Tastatur_TA08.png
. Changing the springs
. switching power supplies; Cold glue to the coils
. Plastic cover for the punch tape unit is broken; 3D printing spare part
. device is configured to communicate in the Hungarian language; correct.

Can send Data from "Varaianten-ROM" - all plugged ROM ?
And photo from "Typenschild"?

Her configuration tool to build new variant: F2000 Variant and Fonts
Benutzeravatar

SAS
Rank 7
Rank 7
Beiträge: 655
Registriert: Mi 13. Jun 2018, 16:12
Wohnort: Berlin
Hauptanschluß: 30944750
Kontaktdaten:

Re: F2000A restoration

#4

Beitrag: # 34165Beitrag SAS »

EPROM M = FKG
EPROM N = Systemkonfiguration
EPROM O = Varianten-EPROM

EPROM P/R Zeichensatz
IMG_1857.jpg
Ab Geräte Nr.: 220 000 gab es Änderungen im Schalt-Netzteil.

Topic author
levend
Rank 1
Rank 1
Beiträge: 54
Registriert: Mo 10. Mai 2021, 23:25
Wohnort: Budapest, HU
Hauptanschluß: 1604188

Re: F2000A restoration

#5

Beitrag: # 34166Beitrag levend »

Thanks SAS for the hints. Now after changing the battery, the device acts like this:
Does not matter if I connect it to the i-Telex, or not.
Serial number is: 320 644
Type label photo:
IMG_3514.JPG
About EPROMs: yes, but only later - I have to obtain an EPROM reader/deleter.
Could you please share the manual, its ok if it's in german only - I can use google translate.
Du hast keine ausreichende Berechtigung, um die Dateianhänge dieses Beitrags anzusehen.
Folgende Benutzer bedankten sich beim Autor levend für den Beitrag:
SAS
Best regards,
Balazs
Budapest, HU
Siemens T1000S - 1604188 elek h
ZB T100 - 73468 nycip h

Topic author
levend
Rank 1
Rank 1
Beiträge: 54
Registriert: Mo 10. Mai 2021, 23:25
Wohnort: Budapest, HU
Hauptanschluß: 1604188

Re: F2000A restoration

#6

Beitrag: # 34167Beitrag levend »

Actually, now it's worse - it does not even move the print head, but 3 LEDs are blinking
Best regards,
Balazs
Budapest, HU
Siemens T1000S - 1604188 elek h
ZB T100 - 73468 nycip h
Benutzeravatar

SAS
Rank 7
Rank 7
Beiträge: 655
Registriert: Mi 13. Jun 2018, 16:12
Wohnort: Berlin
Hauptanschluß: 30944750
Kontaktdaten:

Re: F2000A restoration

#7

Beitrag: # 34175Beitrag SAS »

Mojen,

erste Blinkende LED = keine Linie
zweite Blinkende LED = kein Pappier
dritte Blinkende LED = kein Lochstreifenpappier
Benutzeravatar

ISBRAND
Rank 8
Rank 8
Beiträge: 785
Registriert: So 12. Jun 2016, 18:15
Wohnort: Bad Doberan
Hauptanschluß: 31195 bdvpr dd
Kontaktdaten:

Re: F2000A restoration

#8

Beitrag: # 35753Beitrag ISBRAND »

und Haube auf mag er auch nicht zwingend, aber dafür gibt es ja den Schalter der sich per Hand schließen läßt....
Viele liebe Grüße
Isbrand
:coffee:

31195 bdvpr dd =T 100s,
31203 stbro dd =T 1000S-MD,
31228 bdp dd =LO 3000,
733377 vpbd dd =LO 3000,
Mini-Telex:64964055=bdvpr dd,
TXP 1.0:038203/733419 vpbd dd =T 100s,
i-TELEX-TELEGRAMM: 400365 bdoberan =T 1000S-MD,
BTX:400365
:sign:
Antworten

Zurück zu „Machine Restoration“