Service and Support

Neues Thema

56 Themen

Bekanntmachungen

Antworten

Zugriffe

Letzter Beitrag

Locked New User Map / Neue Mitgliederkarte

Letzter Beitrag von Alex « Mo 13. Nov 2023, 11:01
Verfasst in Foren-FAQ

von Alex » Mo 13. Nov 2023, 11:01 » in Foren-FAQ

Da die alte Mitgliederkarte schon lange nicht mehr vom Entwickler gepflegt wird und mit der kommenden Umstellung auf php 8.x überhaupt nicht mehr funktionieren wird, habe ich mich für eine andere Lösung über Geonames.com entschieden. Die Karte bietet mehr Features, einen integrierten Event-Kalender und POI-Marker, ist also um einiges komfortabler und flexibler. Leider lassen sich die Daten aus der alten Karte nicht in die Neue übernehmen, wobei dort aber auch fast 50 falsche Einträge (mitten im Meer, der Wüste und sonstwo, wo sicherlich keiner wohnt) gesetzt worden sind. Daher würde ich gerne alle bitten, die weiterhin auf der Benutzerkarte verzeichnet sein wollen, in UCP (User Control Panel) den eigenen Standort durch Eingabe des Landes und der Postleitzahl neu zu setzen.

Die Karte kann über diesen Link oder über einen Klick auf das Icon in der Navbar des Forums aufgerufen werden.

---

As the user map has not been maintained by the developer for a long time and will no longer work...

0 Antworten

82924 Zugriffe

Letzter Beitrag von Alex
Mo 13. Nov 2023, 11:01

Themen

Antworten

Zugriffe

Letzter Beitrag

What was this bruned component in my T1000s power supply?

Letzter Beitrag von Murvel « Sa 8. Feb 2025, 20:27
Antworten: 4
von Murvel » So 3. Nov 2024, 18:29

So while taking apart and cleaning my t1000s I heard something loose in the powersupply and something that looked like a little stone fell out :?
I took apart the supply and eventually found this mysterious part. It has clearly been very hot at some point and is all cracked to pieces.
20241103_183824arrow.jpg

20241103_184455.jpg

It has been very warm at some point in time
20241103_185403.jpg

Here is its cremated remains. Looks to have been about 8mm in diameter and about 7mm long with the connections at the round ends.
20241103_190454.jpg
20241103_190440.jpg

And this is the board serial number
20241103_185515.jpg

I have no schematics for this supply so i can not look it up what i could be. I know where to find a couple other similar machines so one possibility is that i go and take apart another one and check what it is. Maybe i could even borrow a supply.

I am just suspicious of what caused that part to fail. And if it could have damaged anything else in the...

4 Antworten

72031 Zugriffe

Letzter Beitrag von Murvel
Sa 8. Feb 2025, 20:27
Dot-matrix T1000s. Some questions about bringing it back to life

Letzter Beitrag von Murvel « So 27. Okt 2024, 22:22
Antworten: 2
von Murvel » So 27. Okt 2024, 21:02

I just became involved in the local telehistorical group and was allowed to take home a new machine to play with :dance:
I just randomly decided on one and to my surprise, when i came home and opened it up, it is a dot matrix model. I had no idea such models even exsisted! I have a lot to learn about these to figure out what the different boards to and how it all works together!

I am having a hard time to find any information at all on these, so maybe someone here could fill me in on what i really have here. I guess it would be a good idea to change the usual T1000 capacitors before i give her any power but any pointers and suggestions is welcome!
A service manual would be great to have :holy:

20241023_180115.jpg

Made in Finland even!
20241023_180045.jpg

20241023_175850.jpg

20241023_180017.jpg

And some pictures of the cards. Maybe it might be interesting . Seems most ICs are dated 80 and 81

20241024_182547.jpg

20241024_185146.jpg

Main board has this little...

2 Antworten

2338 Zugriffe

Letzter Beitrag von Murvel
So 27. Okt 2024, 22:22
how to connect T1000Z to demodulator for RTTY

Letzter Beitrag von Fred55 « Di 2. Jan 2024, 18:03
Antworten: 7
von Fred55 » Fr 15. Dez 2023, 01:43

I have almost finished restoring my T1000Z - took me 4 months
I took it completely apart(not the printer). I changed all the electrolytics and tantalum caps, except for the 2 large electrolytic caps in the power supply sitting in those black plastic cylinders.
I have it working on local loop, but it is doing strange things.
If I try to type on the keyboard and punch a tape, it works for anywhere from 2 characters to half a line, but then it stops punching and go into a hold mode. I then have to press the I button to activate the keyboard again.
How can I prevent this from happening ?

Next problem - how do I connect it to a demodulator ? There was a sticker on the case that said 60vdc and 40 mA.
Is there a power supply inside that has this voltage ? There must be something, because it works on local mode.
There is a cable that comes out and it has multiple colored wires. The 1/4 plug was ripped off accidentally,
so I don't know how to hook it up to a demodulator. Do I need a separate...

7 Antworten

15053 Zugriffe

Letzter Beitrag von Fred55
Di 2. Jan 2024, 18:03
My First « Near Working » Teletype ASR-33

Letzter Beitrag von KraftwerkNation63 « Mo 19. Jun 2023, 22:56
Antworten: 26
von KraftwerkNation63 » So 4. Jun 2023, 17:58
1

2

3
Hi Everyone,

I see that I have put my topic in the wrong section. I’m not German, so I post this topic in the international section. Maybe someone of you, remember my first presentation, of my Sagem SP5A. Unfortunatly, the documentations, spare parts, etc... Are very difficult to found. And the specific , two voltage system, of the Sagem is a brake to the idea to repare it. So, i have take the decision to sell it!

I have found, on the road of my holiday, a ASR-33. In working condition when he was stored. 15 years ago...! After a first start, the situation, is i think not bad. Don't hesitate to say advice to me. Because, i am a really beginner.

Here the movie of the first start:

So, the next step, is to try to limit the problem of the double character or wrong character , after that, try to found the missing parts, and try to connect it to your network with your help.

Thanks for your help.

Théo
26 Antworten

13896 Zugriffe

Letzter Beitrag von KraftwerkNation63
Mo 19. Jun 2023, 22:56
How to manage Twitter subscriptions

Letzter Beitrag von kphill01 « Mi 8. Feb 2023, 22:04
Antworten: 2
von kphill01 » Mi 8. Feb 2023, 20:35

How do I select/deselect which Twitter feeds I receive on my machine? I have forgotten how to do that.

Best regards,

73
Kevin
W5TTY

2 Antworten

3480 Zugriffe

Letzter Beitrag von kphill01
Mi 8. Feb 2023, 22:04
Teletype M32 ASR - not printing but relays are clicking

Letzter Beitrag von kn4ucl « Di 17. Jan 2023, 19:38
Antworten: 3
von kn4ucl » Sa 24. Dez 2022, 17:52

Good morning! My i-Telex M32 was running great last night but this morning I have a small problem. Instead of printing I get just the sound of the relays clicking. I am assuming this is a Teletype issue but I really don't know :D

Any suggestions appreciated. Here's a video

(I also cross posted this at greenkeys)

Thanks everyone and seasons greetings! :thumbup:

Andy

3 Antworten

4117 Zugriffe

Letzter Beitrag von kn4ucl
Di 17. Jan 2023, 19:38
I needed a diagram of the power supply T1000 Siemens

Letzter Beitrag von M1ECY « Mi 11. Jan 2023, 10:01
Antworten: 8
von JaviRTTY » Fr 6. Jan 2023, 19:37

Hello everyone.
I have a T1000 and I think the power supply is wrong. If someone has the schematic, it would be of great help.
Also if someone tells me how to release the source, since I removed three screws, but I don't know how to remove the cable from the voltage outlets. thank you. :jajas:

8 Antworten

7228 Zugriffe

Letzter Beitrag von M1ECY
Mi 11. Jan 2023, 10:01
Changed addresses of i-telex subscriber servers

Letzter Beitrag von M1ECY « Mi 21. Dez 2022, 10:06
Antworten: 1
von FredSonnenrein » Sa 3. Dez 2022, 16:01

Hello all,

There is an important change regarding the i-telex subscribers servers planned: First the short version:

Please use only the following addresses as subscriber servers of the i-Telex in the future:

tlnserv.teleprinter.net
tlnserv2.teleprinter.net (alternatively telexgateway.de)
tlnserv3.teleprinter.net

Thus all users of the original i-Telex are called upon to enter the above addresses in the configuration under i-Telex network .

Now the complete story:

Some weeks ago a minor change of the server structure already has been made. The server at telexgateway.de, formerly operated by Klaus and Paul, had to be shut down. So I have installed a new cloud based server at the address tlnserv2.teleprinter.net with the same applications as on telexgateway.de before. And the address telexgateway.de was also redirected to that cloud server, so in fact this step needed no activities for the i-telex users.

The next step is: The old subscriber server under my control at the...

1 Antworten

3257 Zugriffe

Letzter Beitrag von M1ECY
Mi 21. Dez 2022, 10:06
SAGEM TX-35E and I-TELEX Connection Issue

Letzter Beitrag von WolfgangH « So 11. Dez 2022, 15:34
Antworten: 7
von bambi » Do 1. Dez 2022, 10:15

Hello Members:

I send this from Australia. I am a recent new member of the I-TELEX network.
I have the SAGEM TX-35E Electronic Telex Model (1985).
The Model can receive calls locally and also from the I-Telex network.
The problem is that it cannot call out.
The voltages are in sleep state with I-TELEX connected
2.616V, 45.6V
Any help would be very gratefully received
Thank you
-byes- bambi

7 Antworten

5350 Zugriffe

Letzter Beitrag von WolfgangH
So 11. Dez 2022, 15:34
czech version of t100 set up

Letzter Beitrag von WolfgangH « Mo 26. Sep 2022, 23:01
Antworten: 40
von bandess » Fr 29. Apr 2022, 14:45
1

2

3

4

5
hello everyone,

We are a team running a newspaper called Telex (telex.hu) in Hungary. As a hobby project we want to bring our machine to live.

With the help of one community member here, (Henning) we successfully purchaced a t100 brno verion machine and the following cards:

- Neues Backplane mit Trafo (Backplane 7Tr)
- Trafoplatine verfügbar
- Stromversorgung “normal”
- i-Telex
- TW39 “SPEZIAL”

Now we have the wire from t100 and the panels but don't know where to connect this bell wires on the panel.

Is there anyone who could assis us on this?
40 Antworten

22286 Zugriffe

Letzter Beitrag von WolfgangH
Mo 26. Sep 2022, 23:01
Looking for PACT 220 manual

Letzter Beitrag von appleringo « So 25. Sep 2022, 16:59
Antworten: 1
von appleringo » Di 20. Sep 2022, 11:56

Hello everyone, I just registered an account on this forum. This forum is very informative, but I seem to be missing some search skills. I just bought a Philips pact 220, but I can't find any manuals, can anyone help me？Thanks a lot for everyone's help.

1 Antworten

3567 Zugriffe

Letzter Beitrag von appleringo
So 25. Sep 2022, 16:59
Siemens TGN2 (Receive Only T1000)

Letzter Beitrag von M1ECY « Mi 7. Sep 2022, 22:31
Antworten: 2
von M1ECY » So 23. Mai 2021, 20:35

This evening a museum dropped this machine off with me for test/repair.

This is a British machine, and as far as can be seen operates using something close to RS232

Any suggestions regarding generating a signal source for testing would be appreciated

2 Antworten

4700 Zugriffe

Letzter Beitrag von M1ECY
Mi 7. Sep 2022, 22:31
Siemens TGN1 (Receive only UK Spec "T1000") Interface cards.

Letzter Beitrag von M1ECY « So 6. Mär 2022, 15:57

von M1ECY » So 6. Mär 2022, 15:57

Hello All,

Sorry, been a bit quiet from the Hitchin Telex Office - Work and other things have interfered with the hobby time far too much over the past year.

I have a dilemma, there are a number of the SIemens TGN telex machines here - a loosely based version of the T1000, but being made for the Royal Navy, to a specification that is not ideal for telex use.

I have the Line interface card, and Machine Interface card in pictures below - obviously not single or double current loop Telex design - maybe some kind of serial interface?

There is little to no information available for these machines in the UK can any of the experts here suggest an identification?

0 Antworten

3431 Zugriffe

Letzter Beitrag von M1ECY
So 6. Mär 2022, 15:57
Connecting more than one ethernet card to a router

Letzter Beitrag von M1ECY « Fr 29. Okt 2021, 16:16
Antworten: 5
von M1ECY » Di 26. Okt 2021, 18:24

I am in the position where I need to connect two I-Telex Systems to my one router (One in the workshop, and one in the office here)

I have adjusted the MAC address of the ethernet card, but I am struggling with the basics of setting alternate port forwarding - Bernd kindly gave the suggestion in the chat that I can use a different port number in my router, and this should work once the server is updated to reflect these changes.

Obviously I am not the first person to try this, so could I ask some help from the experts?

Thanks
Sean

5 Antworten

5220 Zugriffe

Letzter Beitrag von M1ECY
Fr 29. Okt 2021, 16:16
MTK2 for USSR teletypes

Letzter Beitrag von FredSonnenrein « Sa 24. Apr 2021, 11:25
Antworten: 9
von lis86 » Di 6. Apr 2021, 13:59

I-Telex, TW39 Serial unit, TW39 Interface supports MTK2 Cyrillic baudot code?

9 Antworten

9623 Zugriffe

Letzter Beitrag von FredSonnenrein
Sa 24. Apr 2021, 11:25
Power Supply Board

Letzter Beitrag von FredSonnenrein « Fr 9. Apr 2021, 12:51
Antworten: 1
von lis86 » Fr 9. Apr 2021, 12:47

which modules use =30V and =120V(~12V) power?
Can remove this power rail?

1 Antworten

4158 Zugriffe

Letzter Beitrag von FredSonnenrein
Fr 9. Apr 2021, 12:51
Problems with WRU action.

Letzter Beitrag von Werner « Mo 9. Nov 2020, 10:38
Antworten: 6
von JDAngus » Sa 17. Okt 2020, 00:18

For some odd reason, when my Lorenz Lo-15c receives the WRU symbol, it prints the Maltese Cross on the printer paper, but does not trigger the Answer back drum.
Sequence of events:
Pressing either the Here is button on the front of the keyboard, or pressing down on lever F triggers the Answer Back sequence.
This is a short video of the two levers at the base of the printer. One (A in the .pdf file) moves as it should. The other does nothing.

So, now where do I look as to why the other lever does nothing?

Jeff

6 Antworten

10004 Zugriffe

Letzter Beitrag von Werner
Mo 9. Nov 2020, 10:38
Fault Indicator Flashes Briefly on TeKaDe FS220

Letzter Beitrag von ash « Mi 28. Okt 2020, 08:39
Antworten: 2
von ash » Mo 26. Okt 2020, 02:39

Hello. Apologies in advance for the relatively basic questions!

My FS220 and V.10 interface have been serving me well for the past six months or so (huge thanks to Sean for the V.10 card), however a potential problem has arisen in the past few days for no obvious reason. When I power down the FS220, the fault light briefly flashes (for about 200ms) before the device turns completely off. It powers back up again with no issue, and seems entirely operational, however I'm worried that this is abnormal, and I don't have the expertise or confidence to triage it further. Nothing has significantly changed since it started exhibiting this behaviour, aside from moving it from one desk to another in my house. It's rather light (about 50kg), so I can't imagine it got internally damaged from the move, however nor can I be certain that this behaviour wasn't present before moving it and I just never noticed.

Any diagnosis tips? The manual terms the light a collective fault indicator , suggesting...

2 Antworten

5671 Zugriffe

Letzter Beitrag von ash
Mi 28. Okt 2020, 08:39
TW39Plus questions

Letzter Beitrag von PaulHeller « Di 27. Okt 2020, 16:52
Antworten: 2
von PaulHeller » Di 27. Okt 2020, 00:12

Hello, please excuse my questions but I could not find documentation for the TW39plus options and I don't always know the technical german words.

I just replaced the chip on my TW39 card with an ATMEGA328P so that I could use TW39plus. I understand most of the new options but there are some that I do not understand:

- Weiterleitungen abweisen. This has been explained to me before, but I still do not understand what J and N do for this parameter.
- maximale Hochlauf-zeit. Hochlauf?
- Funktion taste am Modul. What are the options for this parameter and what does it do?

Thank you in advance.
IMG_2287.jpg
Paul

2 Antworten

6330 Zugriffe

Letzter Beitrag von PaulHeller
Di 27. Okt 2020, 16:52
CRC Error when updating ethernet card

Letzter Beitrag von PaulHeller « Di 20. Okt 2020, 04:54
Antworten: 6
von PaulHeller » So 18. Okt 2020, 21:35

Hi,

I'm getting this:
fboot.exe /C1 /B38400 /Pmain.hex /Vmain.hex
COM 1 at 38400 Baud: Connected
Bootloader V2.1
Target: 1E9802 fboot.DEF
Buffer: 7680 Byte
Size available: 261120 Byte
CRC-Error

Any ideas?

6 Antworten

8655 Zugriffe

Letzter Beitrag von PaulHeller
Di 20. Okt 2020, 04:54
Lorenz Answer back coding and repair.

Letzter Beitrag von JDAngus « So 11. Okt 2020, 22:00
Antworten: 1
von JDAngus » So 11. Okt 2020, 20:31

As some of you may have found out the hard way, the little springs on the answer back drum are next to impossible to find.
I found this out the hard way when I launched one into orbit accidentally trying to reprogram my here is code.
I got to thinking, Surely I can use an o-ring for this.
mykin.com sells o-rings. So I ordered 50 of them. Standard AS528-016. 1/16 x 5/8 made of silicon.

Then installled them on the answer back drum.

Of course, nothing is as simple as it seems. :whack: First time, I had the tabs facing the wrong way so they missed the contact levers.
Then I had the code wrong. Third time's a charm. My here is reads 76470 jeff tx now.

Bending a small J-hook in a paper clip made inserting the tabs very easy. Lift the o-ring up out of the way, insert tab and let the o-ring back down.

And here is an easier version of the chart to read. Answer Back Coding.pdf

Hope this helps.

Jeff

1 Antworten

5332 Zugriffe

Letzter Beitrag von JDAngus
So 11. Okt 2020, 22:00
Getting my Lorenz working again.

Letzter Beitrag von JDAngus « So 4. Okt 2020, 22:39
Antworten: 8
von JDAngus » Di 15. Sep 2020, 21:03

After about 5 years of down time, I finally got my Lo-15c clean and shiny again.
*grins* Hasn't looked this clean since 1963 probably.

So, next step, connect everything again and see if it works.
First off, there's an extra part laying on the bench. I have no idea what is or where it goes.
Mystery Part

Secondly, when I press the LT button on the Call Control Unit, it runs open. I noticed a open resistor by the selector wiring.
Disconnected

Any help is welcome.

Jeff

8 Antworten

9579 Zugriffe

Letzter Beitrag von JDAngus
So 4. Okt 2020, 22:39
Lorenz Interconnection panel

Letzter Beitrag von PaulHeller « Di 29. Sep 2020, 23:11
Antworten: 2
von JDAngus » Di 22. Sep 2020, 21:30

While taking a break on another project, I drew up a schematic diagram of the interconnection panel for the full size Lorenz cabinet for the Lo-15b and c models.

Jeff

2 Antworten

5809 Zugriffe

Letzter Beitrag von PaulHeller
Di 29. Sep 2020, 23:11
Siemens T1000 schreibt nur halbe Seiten

Letzter Beitrag von DrT1000 « Mo 7. Sep 2020, 11:04
Antworten: 1
von pe2kmv » Sa 22. Aug 2020, 21:52

Hallo Leute,

Nach langer Zeit habe ich mir mal wieder dem T1000 gewidmet. Anfangs hatte ich das Problem daß der Drucker sich aus der Anfangsposition nur um ein Zeichen nach rechts bewegt hat. Als ich dann mal den Zahnriemen gelöst hatte, habe ich festgestellt daß der Schrittmotor der den Drucker bewegt gegen einen Anschlag läuft. Ich konnte den Motor manuell gegen den Uhrzeigersinn drehen, aber nach ein paar Umdrehungen lief er wieder gegen einen mechanischen Anschlag.

Danach habe ich den Fernschreiber mal eingeschaltet, ohne daß der Zahnriemen gespannt war. Dann hat es im / beim Schrittmotor geklickt und er lief uneingeschränkt entgegen Uhrzeigersinn (quasi um den Drucker nach links zu bewegen). Nachdem aber Spannung aus bzw. Lokalbetrieb aus war, konnte ich den Motor von Hand wieder nur ganz eingeschränkt zwischen zwei mechanischen Endpunkte bewegen.

Ich habe schon das Servicehandbuch studiert, aber nirgendwo finde ich etwas von einer (elektro-)mechanischen Freigabe um über die...

1 Antworten

6099 Zugriffe

Letzter Beitrag von DrT1000
Mo 7. Sep 2020, 11:04
Trouble retrieving messages from serial connection

Letzter Beitrag von PaulHeller « So 21. Jun 2020, 05:40
Antworten: 14
von PaulHeller » Sa 6. Jun 2020, 05:32
1

2
Hello, after several years I am back and active on i-Telex. I've had a number of very nice chats recently. My intention is to route messages to the serial port if my other ports are offline. So I have been testing the serial port. The port works fine - I can call other numbers from it and other numbers can call me. The problem is when someone calls me and I am not there to answer. Their message is stored in the call memory and the green LED flashes. That's good., I can retrieve the from one of the other machines connected to one of the other ports (remote access) by dialing the serial port (34 in my case), pressing FIGS-D, and then tying in my password. But I cannot retrieve the messages from the serial port directly. I press Ctrl-Q and then it does not display the message like it does on the remote access. It only shows 0.

What am I doing wrong?

Here is what I see in the serial port connection:
Ctrl-A: Anwahl, Ctrl-K: Konfiguration, Ctrl-Q: AB-Wiedergabe --> ^Q
^Q
Starte...
14 Antworten

15764 Zugriffe

Letzter Beitrag von PaulHeller
So 21. Jun 2020, 05:40

Neues Thema

56 Themen

Zurück zur Foren-Übersicht

Berechtigungen in diesem Forum

Du darfst keine neuen Themen in diesem Forum erstellen.
Du darfst keine Antworten zu Themen in diesem Forum erstellen.
Du darfst deine Beiträge in diesem Forum nicht ändern.
Du darfst deine Beiträge in diesem Forum nicht löschen.
Du darfst keine Dateianhänge in diesem Forum erstellen.