V.10 Interface on the TeKaDe FS-220(Z)
-
Topic author - Rank 1
- Beiträge: 9
- Registriert: Sa 13. Jun 2020, 06:28
- Wohnort: Wakefield, United Kingdom
- Hauptanschluß:
- Kontaktdaten:
V.10 Interface on the TeKaDe FS-220(Z)
Hello,
I have recently bought a TeKaDe FS-220(Z) with the impression that it would support V.10 out-of-the-box, as indicated on page 43 (31) of the manual [1]. However, when it arrived, it only seems to have the arcane ADo8 interface [2], for which I can't find much information; it seems to be something from the pre-T.A.E. era [3, 4]. Nevertheless, I would still like to use V.10 to connect the TTY to my computer (Gentoo Linux), by converting the well-documented signal (EIA-530) [5] to an RS-232 interface [6, 7], which can then be converted to U.S.B. with the CH340 (supports five-bit character encoding) chipset [8, 9].
Does anyone know how to use the V.10 interface with the FS-220 ? I was looking at [10]---the same vendor from whom I purchased the TTY---however I am very unsure at this point.
Thanks,
Ashley.
[1] https://cryptomuseum.com/telex/tekade/f ... /fs200.pdf
[2] https://de.wikipedia.org/wiki/Anschluss ... _und_ADo_8
[3] https://www.cryptomuseum.com/telex/ (ADo 8 sub-heading)
[4] https://www.toytowngermany.com/forum/to ... e-sockets/
[5] https://pinouts.ru/SerialPorts/eia530_pinout.shtml
[6] https://pinouts.ru/SerialPorts/RS232_pinout.shtml
[7] https://raw.githubusercontent.com/wiki/ ... erEcho.png
[8] https://github.com/fablab-wue/piTelex/wiki/HW_V10
[9] https://www.ebay.co.uk/itm/112953379508
[10] https://bw-schmitti.de/produkt/ergaenzu ... nen-fs200/
I have recently bought a TeKaDe FS-220(Z) with the impression that it would support V.10 out-of-the-box, as indicated on page 43 (31) of the manual [1]. However, when it arrived, it only seems to have the arcane ADo8 interface [2], for which I can't find much information; it seems to be something from the pre-T.A.E. era [3, 4]. Nevertheless, I would still like to use V.10 to connect the TTY to my computer (Gentoo Linux), by converting the well-documented signal (EIA-530) [5] to an RS-232 interface [6, 7], which can then be converted to U.S.B. with the CH340 (supports five-bit character encoding) chipset [8, 9].
Does anyone know how to use the V.10 interface with the FS-220 ? I was looking at [10]---the same vendor from whom I purchased the TTY---however I am very unsure at this point.
Thanks,
Ashley.
[1] https://cryptomuseum.com/telex/tekade/f ... /fs200.pdf
[2] https://de.wikipedia.org/wiki/Anschluss ... _und_ADo_8
[3] https://www.cryptomuseum.com/telex/ (ADo 8 sub-heading)
[4] https://www.toytowngermany.com/forum/to ... e-sockets/
[5] https://pinouts.ru/SerialPorts/eia530_pinout.shtml
[6] https://pinouts.ru/SerialPorts/RS232_pinout.shtml
[7] https://raw.githubusercontent.com/wiki/ ... erEcho.png
[8] https://github.com/fablab-wue/piTelex/wiki/HW_V10
[9] https://www.ebay.co.uk/itm/112953379508
[10] https://bw-schmitti.de/produkt/ergaenzu ... nen-fs200/
Ashley Dixon
http://git.suugaku.co.uk
http://git.suugaku.co.uk
-
- Founder
- Beiträge: 3428
- Registriert: Di 7. Jun 2016, 09:45
- Wohnort: Edemissen - Blumenhagen
- Hauptanschluß: 925302 treu d
- Kontaktdaten:
Re: V.10 Interface on the TeKaDe FS-220(Z)
Almost likely the connector with ADo8 is a 40ma line current interface.
mfg
henning +++
925302 treu d - T1000Z (Hauptanschluss)
55571 fvler a - T100S
210911za hmb d - T150 (Werkstatt)
218308 test d - T1000S/LS (Werkstatt)
925333 =treu d (Minitelex Sanyo SF100) defekt
Fax G2/G3: 05176-9754481 (Sanyo SF100 Thermofax) defekt
henning +++
925302 treu d - T1000Z (Hauptanschluss)
55571 fvler a - T100S
210911za hmb d - T150 (Werkstatt)
218308 test d - T1000S/LS (Werkstatt)
925333 =treu d (Minitelex Sanyo SF100) defekt
Fax G2/G3: 05176-9754481 (Sanyo SF100 Thermofax) defekt
-
- Rank 3
- Beiträge: 125
- Registriert: Mi 13. Nov 2019, 11:26
- Hauptanschluß: 35822 STIKO NL
Re: V.10 Interface on the TeKaDe FS-220(Z)
If I understand correctly, there are two physically different interfaces available of which you can plug in *one* in the FS220. Could it be that you just have the 'wrong' one in there?
BartW. +++
35822 STIKO NL - FS220 + Fsg T56
42223 CMVZW NL - T100 mit Fsg 100 TL
T1000Z - Lauft (noch lange) nicht
35822 STIKO NL - FS220 + Fsg T56
42223 CMVZW NL - T100 mit Fsg 100 TL
T1000Z - Lauft (noch lange) nicht
-
Topic author - Rank 1
- Beiträge: 9
- Registriert: Sa 13. Jun 2020, 06:28
- Wohnort: Wakefield, United Kingdom
- Hauptanschluß:
- Kontaktdaten:
Re: V.10 Interface on the TeKaDe FS-220(Z)
In that case, will I need to remove the backplate and replace the ADo 8 card with [1] ? I still have yet to work out how to remove the backplate: I removed all the screws and it still won't budge a centimetre. I can't work out whether it's because it is rather old, and has thus "seized up", or I am doing something wrong.
[1] https://bw-schmitti.de/produkt/ergaenzu ... nen-fs200/
Ashley Dixon
http://git.suugaku.co.uk
http://git.suugaku.co.uk
-
- Rank 3
- Beiträge: 125
- Registriert: Mi 13. Nov 2019, 11:26
- Hauptanschluß: 35822 STIKO NL
Re: V.10 Interface on the TeKaDe FS-220(Z)
I suppose so
Can't recall exactly, but did you start by taking the top off?I still have yet to work out how to remove the backplate: I removed all the screws and it still won't budge a centimetre. I can't work out whether it's because it is rather old, and has thus "seized up", or I am doing something wrong.
BartW. +++
35822 STIKO NL - FS220 + Fsg T56
42223 CMVZW NL - T100 mit Fsg 100 TL
T1000Z - Lauft (noch lange) nicht
35822 STIKO NL - FS220 + Fsg T56
42223 CMVZW NL - T100 mit Fsg 100 TL
T1000Z - Lauft (noch lange) nicht
-
Topic author - Rank 1
- Beiträge: 9
- Registriert: Sa 13. Jun 2020, 06:28
- Wohnort: Wakefield, United Kingdom
- Hauptanschluß:
- Kontaktdaten:
Re: V.10 Interface on the TeKaDe FS-220(Z)
Damn - I was trying to remove the backplate, not the top. I can't imagine why there are external screws on the backplate, when it obviously needs to be unscrewed from the inside. The top comes off easily, and it seems like that V.10 card from BW-Schmitti will fit it perfectly. Cheers for the help, even if it did just involve removing four screws. Now the challenge is getting the top back on. ;-)
Thanks again,
Ashley.
Ashley Dixon
http://git.suugaku.co.uk
http://git.suugaku.co.uk
-
- Founder
- Beiträge: 3428
- Registriert: Di 7. Jun 2016, 09:45
- Wohnort: Edemissen - Blumenhagen
- Hauptanschluß: 925302 treu d
- Kontaktdaten:
Re: V.10 Interface on the TeKaDe FS-220(Z)
The "V.10 card" that BW-Schmiti sells in his shop is actually a 40ma linecurrent card. Since this guy is an ordinary scrap dealer he
does not know what he is selling fortunately.
Generally the V.10 interface is fitted with a DB-25 connector. Although there might be a few excecptions, but VERY few
that also use ADo8.
does not know what he is selling fortunately.
Generally the V.10 interface is fitted with a DB-25 connector. Although there might be a few excecptions, but VERY few
that also use ADo8.
mfg
henning +++
925302 treu d - T1000Z (Hauptanschluss)
55571 fvler a - T100S
210911za hmb d - T150 (Werkstatt)
218308 test d - T1000S/LS (Werkstatt)
925333 =treu d (Minitelex Sanyo SF100) defekt
Fax G2/G3: 05176-9754481 (Sanyo SF100 Thermofax) defekt
henning +++
925302 treu d - T1000Z (Hauptanschluss)
55571 fvler a - T100S
210911za hmb d - T150 (Werkstatt)
218308 test d - T1000S/LS (Werkstatt)
925333 =treu d (Minitelex Sanyo SF100) defekt
Fax G2/G3: 05176-9754481 (Sanyo SF100 Thermofax) defekt
-
- Rank 3
- Beiträge: 125
- Registriert: Mi 13. Nov 2019, 11:26
- Hauptanschluß: 35822 STIKO NL
Re: V.10 Interface on the TeKaDe FS-220(Z)
Isn't that exactly what he BW-Schmitti selling? https://bw-schmitti.de/produkt/ergaenzu ... nen-fs200/
BartW. +++
35822 STIKO NL - FS220 + Fsg T56
42223 CMVZW NL - T100 mit Fsg 100 TL
T1000Z - Lauft (noch lange) nicht
35822 STIKO NL - FS220 + Fsg T56
42223 CMVZW NL - T100 mit Fsg 100 TL
T1000Z - Lauft (noch lange) nicht
-
- Founder
- Beiträge: 3428
- Registriert: Di 7. Jun 2016, 09:45
- Wohnort: Edemissen - Blumenhagen
- Hauptanschluß: 925302 treu d
- Kontaktdaten:
Re: V.10 Interface on the TeKaDe FS-220(Z)
Yes, that's a V.10 module on the photo, but others of the group also already received line current modules when
they ordered a V.10 card...
they ordered a V.10 card...
mfg
henning +++
925302 treu d - T1000Z (Hauptanschluss)
55571 fvler a - T100S
210911za hmb d - T150 (Werkstatt)
218308 test d - T1000S/LS (Werkstatt)
925333 =treu d (Minitelex Sanyo SF100) defekt
Fax G2/G3: 05176-9754481 (Sanyo SF100 Thermofax) defekt
henning +++
925302 treu d - T1000Z (Hauptanschluss)
55571 fvler a - T100S
210911za hmb d - T150 (Werkstatt)
218308 test d - T1000S/LS (Werkstatt)
925333 =treu d (Minitelex Sanyo SF100) defekt
Fax G2/G3: 05176-9754481 (Sanyo SF100 Thermofax) defekt
-
- Rank 3
- Beiträge: 125
- Registriert: Mi 13. Nov 2019, 11:26
- Hauptanschluß: 35822 STIKO NL
Re: V.10 Interface on the TeKaDe FS-220(Z)
I've bought a keyboard from them, and a couple of manuals. The manuals were fine, the keyboard was nice to experiment with but would never had worked
YMMV, of course.
YMMV, of course.
BartW. +++
35822 STIKO NL - FS220 + Fsg T56
42223 CMVZW NL - T100 mit Fsg 100 TL
T1000Z - Lauft (noch lange) nicht
35822 STIKO NL - FS220 + Fsg T56
42223 CMVZW NL - T100 mit Fsg 100 TL
T1000Z - Lauft (noch lange) nicht